Instant Bond Wood Adhesive Gel Adhesive

titebond premium

About “Titebond Instant Bond GEL”


Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates.

The gel viscosity product offers the longest assembly time of 30 seconds and an initial cure speed of 20 seconds. It is ideal for gap-filling applications, gluing porous and odd-shaped surfaces and various cabinet making applications, such as pre-bonding moldings to install as one unit.

Product Features

  • Fast set - Eliminates clamping or reduces clamp time
  • Bonds stronger than wood
  • Excellent heat and solvent-resistance
  • Unaffected by finishes
  • Versatile - Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more
  • Adhesion of pen tubes to blanks in pen making
  • Triple distilled for purity & consistency
  • Impact-resistant
  • No-clog applicator for easy use and waste reduction

Physical Properties

Type: Ethyl cyanoacrylate
Color: Clear
Dried Film: Translucent
Solids: 100%
Viscosity: 60,000 cps 
Strength: Between 2800 and 4200 psi (196.85 Kg/cm2 / 295.28 Kg/cm2) depending on substrate tested

Freeze/thaw Stability: Stable

VOC: 20 g/L
Flashpoint: >81,110C

Application Temperature: Above +100
Service Temperature Range: -540C to +940
Cure Speed: 30 second handling, 20 second set, 60 second cure. *Full cure in 8 hours.


Cleanup: Use acetone. Follow solvent vendor’s precautions.


Titebond Instant Bond Wood Adhesive is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times may be affected by environmental conditions. For best results, apply adhesive between +12°C and +30°C. KEEP FROM FREEZING.

DANGER: COMBUSTIBLE LIQUID. Bonds skin, eye and other tissue instantly. Contains ethyl-2-cyanoacrylate. Irritating to eyes, skin and respiratory tract. Do not allow eye or skin contact. Avoid breathing vapors. Do not swallow. Keep away from sources of heat.