0
Inquiry

Titebond Polyurethane Glue

“Titebond Polyurethane Glue”

 

Titebond Polyurethane Glue is a breakthrough in adhesive technology. It is the only polyurethane glue to combine a long 30-minute working time with a short 45-minute clamp time*. It is a versatile, professional-strength glue specifically formulated for multi-purpose applications.

In addition to its superior wood-to-wood performance, Titebond Polyurethane Glue is ideal for metals, ceramics, most plastics, HPL, Corian®, stone and other porous/non-porous materials. It is ready-to-use, offers excellent sandability and is unaffected by finishes.

Product Features

  • 100% waterproof (Passes ANSI Type I & II water-resistance testing);
  • Bonds virtually everything;
  • Epoxy-like strength - No mixing;
  • Short clamp & fast cure;
  • Excellent sandability;
  • 100% solids;
  • Solvent free.

Physical Properties

Type: Polyurethane
Color: Brown
Solids: 100%
Viscosity: 8500
Strength (Room Temperature) 3500psi/24,13 N/mm2             
Strength at 65⁰C (Overnight): 3000psi/20.68 N/mm2
Freeze/thaw Stability: Stable
LOJ: 0 g/L

Flashpoint : >93,33⁰C

Application Guidelines

Application Temperature: Above +10⁰C
Assembly Time After Glue Application: 25-30 min. (21°C./50%RH)
Required Clamping Pressure: Enough to bring joints tightly together – 2,1 – 5,62 kg./1kv.cm, for softwoods – 7-10,5 kg./1kv.cm, for medium woods and 8,78-12,3 kg./1kv.cm, for hardwoods 12,3-17,57 kg./1kv.cm

Method of Application:
Easily spread with a roller, spreader or brush. *NOTE: This product cures by reaction with moisture. Changes in humidity, temperature and moisture content of the glued surfaces will affect open time and minimum clamp time. Maximum open time can be determined by excessive foam development in the adhesive. Minimum clamp time can be determined when squeeze out of adhesive becomes firm.

Cleanup: Mineral spirits while glue is wet. Scrape or sand off dried excess.

Limitations:

Titebond Polyurethane Glue is not for structural applications or for use below the waterline. For ease of application, the glue, temperature and materials to be bonded should be above +10⁰C.
WARNING: EYE AND SKIN IRRITANT. POTENTIAL SKIN AND RESPIRATORY SENSITIZER. KEEP OUT OF THE REACH OF CHILDREN.

Aprašymas PDF. Poliuretaniniai klijai Titebond