Instant Bond Wood Adhesive Thick Adhesive
About “Titebond Instant Bond THICK”
Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates..
The thick viscosity product offers an assembly time of 10 seconds and an initial cure speed of 8 seconds. It is ideal for bonding end-grain in a miter joint application, quick assembly of jigs and fixtures, adhering turning blocks to scrap blocks on a faceplate for immediate use.
- Fast set - Eliminates clamping or reduces clamp time
- Bonds stronger than wood
- Excellent heat and solvent-resistance
- Unaffected by finishes
- Versatile - Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more
- Adhesion of pen tubes to blanks in pen making
- Triple distilled for purity & consistency
- No-clog applicator for easy use and waste reduction
Type: Ethyl cyanoacrylate
Freeze/thaw Stability: Stable
VOC: 20 g/L
|Application Temperature: Above +100C
Service Temperature Range: -540C to +940C
Cure Speed: 10 second handling, 8 second set, 30 second cure. *Full cure in 8 hours.
Cleanup: Use acetone. Follow solvent vendor’s precautions.
Titebond Instant Bond Wood Adhesive is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times may be affected by environmental conditions. For best results, apply adhesive between +12°C and +30°C. KEEP FROM FREEZING.
DANGER: COMBUSTIBLE LIQUID. Bonds skin, eye and other tissue instantly. Contains ethyl-2-cyanoacrylate. Irritating to eyes, skin and respiratory tract. Do not allow eye or skin contact. Avoid breathing vapors. Do not swallow. Keep away from sources of heat.
KEEP OUT OF THE REACH OF CHILDREN.