Titebond Original Wood Glue

50630370830506390237ml125,56 €
50640370830506460474ml128,92 €
50650370830506530948ml613,56 €
506603708305066003,78l237,99 €
506090370835060998,14l/9,9kg176,72 €
...

Titebond Original Wood Glue

 

Titebond Original Wood Glue is the industry standard for woodworking. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes.

Titebond Original can help any woodworker achieve professional-looking results. It is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Titebond Original is easy to use, non-toxic and cleans up with water.

CONFORMS TO ASTM D-4236

Product Features

  • Fast set - Shortens clamp time
  • Bonds stronger than wood
  • Solvent-resistant
  • Excellent sandability
  • Unaffected by finishes
  • Easy cleanup with water
  • FDA approved for indirect food contact
  • Non-toxic

Physical Properties

Application Guidelines

Type: Aliphatic resin emulsion
Color: Yellow
Dried Film: Translucent
Solids: 46%
Viscosity: 3200 cps
BOND STRENGTH ASTM D-905 (ON HARD MAPLE): 3650 psi/25.17 N/mm2
pH: 4.0
Freeze/thaw Stability: Stable
Calculated VOC: 10.7 g/L
Flashpoint: >940
Minimum Required Spread: 6,15 m2 from 1 liter

Application Temperature: +100C   
Open Assembly Time: 4-6 minutes. (21°C./50%RH)
Total Assembly Time: 10-15 minutes (21°C./50%RH)

Required Clamping Pressure:
Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application:
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.

Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations:

Titebond Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.