0
Inquiry

Titebond Quick & Thick Multi-Surface Glue

24030370830240360237ml125,80 €
2404037083024043474ml128,99 €
...

Titebond Quick & Thick Multi-Surface Glue

 

“Titebond Quick & Thick Multi-Surface Glue is the thickest, fastest-drying water-based glue available for use with porous and semi-porous materials. It is ideal for wood, pottery, ceramic, stone, glass, fabrics, leather and most craft-type materials.

Titebond Quick & Thick Multi-Surface Glue provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. It also develops a bond stronger than the wood itself, dries clear and is unaffected by finishes.

Product Features

  • 2X Faster – 3X Thicker than traditional PVA glues
  • Dries clear – Paintable
  • Ideal for the woodshop, home and craft projects
  • Fill small cracks and gaps
  • Unaffected by finishes
  • Excellent sandability on wood
  • Designed for interior projects
  • Water cleanup & non-toxic
  • Nonflammable — No offensive odor
  • Conforms to ASTM D4236

Physical Properties

Application Guidelines

Type: Thixotropic polyvinyl acetate
Color: White
Dried Film: Clear
Solids: 60%
Viscosity: 36500 cps
BOND STRENGTH ASTM D-905 (ON HARD MAPLE): 3000 psi/20,68 N/mm2
pH: 4.8
Freeze/thaw Stability: Stable up to 2 cycles
Calculated VOC: 2.4 g/L
Flashpoint: >940C 
Minimum Required Spread: 6,15 m2 from 1 liter

Application Temperature: +100C   
Open Assembly Time: 3-5 minutes (21°C./50%RH)
Total Assembly Time: 10-15 minutes (21°C./50%RH)

Required Clamping Pressure:
Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application:
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.

Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations:

Titebond Quick & Thick Multi-Surface Glue is not recommended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Not recommended for photos, washable wearables, metals, plastics or rubber. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read SDS before use. For wood, sand glued area thoroughly before staining. Store at room temperature. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

CAUTION: No caution information is needed. Please refer to the Safety Data Sheet for further information.
Tiksotropiniai Universalūs klijai (greito džiūvimo) “Titebond Quick & Thick Multi-Surface Glue” - aprašymas
Titebond Quick & Thick Multi-Surface Glue - skrajutė EN
Titebond Quick & Thick - saugos duomenų lapas.pdf